A tube, or tubing, is a long hollow cylinder used for moving fluids (liquids or gases) or to protect electrical or optical cables and wires.a tube has tighter engineering requirements
A pulley is a wheel on an axle or shaft that is designed to support movement and change of direction of a taut cable or belt, or transfer of power between the shaft and cable or belt.
A pulley is a wheel on an axle or shaft that is designed to support movement and change of direction of a taut cable or belt, or transfer of power between the shaft and cable or belt.
embossing is a stamping process for producing raised or sunken designs or relief in sheet metal. This process can be made by roller dies, or by passing sheet of metal between rolls
A drum brake is a brake that uses friction cause by a set of shoes or pads that press outward against a rotating cylinder-shaped part called a brake drum.
A pinion is a round gear used in several applications: usually the smaller gear in a gear drive train, although in the first commercially successful steam locomotive (the Salamanca),
Wipers may be variety of means, although most in use today are powered by an electric motor through a series of mechanical components,two 4-bar linkages in series or parallel.
Rubber roller is suitable for section between the cable drum and the start of the trench as per the site requirement. Rubber rollers are made of steel rollers for smooth rotations.
A pin is a device used for fastening objects or material together. Pins often have two components: a long body and sharp tip made of steel, or occasionally copper or brass
A pin is a device used for fastening objects or material together. Pins often have two components: a long body and sharp tip made of steel, or occasionally copper or brass
cable tray is used to support insulated electrical cables used for power distribution, control & communication. Cable trays are used to open wiring or electrical conduit systems
cutter is any tool that is used to remove material from the work piece by means of shear deformation. Cutting may be accomplished by single-point or multipoint tools
A shaft is a rotating machine element, usually circular in cross section, which is used to transmit power from one part to another, or from a machine which produces power to a machine which absorbs power.
A shaft is a rotating machine element, usually circular in cross section, which is used to transmit power from one part to another, or from a machine which produces power to a machine which absorbs power.
A pulley is a wheel on an axle or shaft that is designed to support movement and change of direction of a taut cable or belt, or transfer of power between the shaft and cable or belt.used to guide the cable or exert a force
These counter Ceramic pulleys are commonly used components in coil winding machines and textile machines in instances where there are radical changes in the direction of a passing material
Electrical wires are usually covered with insulating materials, such as plastic, rubber-like polymers. Insulating of wires and cables is done by passing them through an extruder
A Bush is a device designed to attach and secure the end of an electrical cable to the equipment.A cable gland provides strain and connects by suitable for the type and description of cable
A pin is a device used for fastening objects or material together. Pins often have two components: a long body and sharp tip made of steel, or occasionally copper or brass
Coaxial cable, or coax is a type of electrical cable that has an inner conductor surrounded by a tubular insulating layer, surrounded by a tubular conducting shield.
A gear is a rotating machine part having cogs, which mesh with another toothed part to transmit torque.Geared devices can change the speed, torque, and direction of a power source
cutter is any tool that is used to remove material from the work piece by means of shear deformation.Cutting may be accomplished by single-point or multipoint tools.
A pulley is a wheel on an axle or shaft that is designed to support movement and change of direction of a taut cable or belt, or transfer of power between the shaft and cable or belt.
